[Alt-photo] Exposure Unit

Gordon Holtslander gjh at shaw.ca
Wed Sep 6 00:09:26 UTC 2017

Look at this UV sensor 



Gordon J. Holtslander 
gjh at shaw.ca 
Learn about HSP http://sp-foundation.org 

From: "alt-photo-process-list at lists.altphotolist.org alt-photo-process-list at lists.altphotolist.org" <alt-photo-process-list at lists.altphotolist.org> 
To: "Larry Ogrodnek" <ogrodnek at gmail.com>, "alt-photo-process-list at lists.altphotolist.org alt-photo-process-list at lists.altphotolist.org" <alt-photo-process-list at lists.altphotolist.org> 
Sent: Tuesday, September 5, 2017 8:04:34 AM 
Subject: Re: [Alt-photo] Exposure Unit 

Hi Don and Larry. Thanks for the interest. I am using Arduino with the ML8511 sensor and I need to figure out how to code for dose. 

“Radiant exposure (H), is dose, and is described in joules (unit of energy) per square meter (J m2) or joules per square centimeter (J cm2). Note that a watt is a joule per second thus the dose rate (W cm2) multiplied by the exposure duration (seconds) equals dose (J cm2).” 

So basically I need to create a timer, then multiply that with the W cm2. 

I just found out the sensor I am using is no longer available and will have to find a new one. 

I am using the basic code that was provided with the sensor. 



> On Sep 4, 2017, at 6:18 PM, Larry Ogrodnek <ogrodnek at gmail.com> wrote: 
> Hey Greg, that sounds really great! Would love to hear about it when you are ready to share. 
> I have some C firmware experience and may be able to help depending on what you need. 
> I used to make/sell some LED nametag kits (http://analogmachines.com/p/nametag/) and have some experience in basic/amateur hardware/software work... 
> thanks, 
> larry 
>> On Mon, Sep 4, 2017 at 9:49 AM, Greg Brophy via Alt-photo-process-list <alt-photo-process-list at lists.altphotolist.org> wrote: 
>> I also wanted to order one of the light measure UV meters and was disappointed that it was discontinued. I went on Facebook and some people pointed me in the right direction for creating my own which I am now in the process of doing. I have a prototype I am working on and am just trying to fix a few kinks in the code, but when done I will share how to do it or if people don't want to make it, I can make it as well. I also plan on making a few improvements like touch screens. The best part is that most of the parts are open source and what isn't can easily be printed with a 3-D printer. I will send out updates as I get closer. If anybody know how to program in C++ and wants to help, let me know. 
>> Greg 
>> _______________________________________________ 
>> Alt-photo-process-list | altphotolist.org 
Alt-photo-process-list | altphotolist.org 

More information about the Alt-photo-process-list mailing list