[Alt-photo] Cuprotype, Cyanotype-Toning Trials

Jim Patterson jimbobnola at cox.net
Thu Sep 27 12:17:46 UTC 2018


Hi, the Cuprotype coating solution has high surface tension.  Adding a drop or two of 10% Tween 20 or dilute Photoflo helps a lot in coating the paper.
Jim Patterson

Sent from my iPhone

> On Sep 27, 2018, at 1:44 AM, BJ68 via Alt-photo-process-list <alt-photo-process-list at lists.altphotolist.org> wrote:
> 
> Dear List, 
> 
> here are a few results of home experimenting:
> 
> First I tried the Cuprotype Process by Jim Patterson:
> http://illumina-chemie.de/chemigrams-and-co-t4590.html#72732
> 
> 
> Yesterday I played a little bit with cyanotypes and the formula:
> http://illumina-chemie.de/chemigrams-and-co-t4590-s15.html#72766
> 
> Tried to tone a exposed cyanotype (Exp. 11 and 5 min) with a bath made out of copper(II)sulfate and ammonium citrate. Reason for that, was this patent https://patents.google.com/patent/US2093421A/en
> where I read this: [...]Upon exposure a piece of blueprint paper (a) becomes more and more blue and then (b) fades out to a light blue grey (c) becoming greyish White when Over-exposed.  During (a) the ferricyanide is being reduced to ferrocyanide for a piece of paper at this stage when washed in an ammonium citrate-copper sulfate solution (from which ferricyanide will not precipitate copper ferricyanide but ferrocyanide will precipitate red copper ferrocyanide) gives a red print. [...]
> I got (at picture not visible) light reddish tones and the blues turned to more blackish color, perhaps I had to adjust the concentration of the copper(II)sulfate higher....
> 
> The other trial was playing with the formula itself:
> In short: To 5 ml potassium ferricyanide and 5 ml ammonium iron(III)citrate solution I put 10 ml of a "copper solution" (composition see the posting). Despite of the precipitation of copper(II)ferricyanide the solution would be applied to paper (difficulties to get a smooth and striation free surface with the brush; if a glass rod works better??), dried (cold air with a fan) and exposed for 6 min with UV and after that the print washed with running water, the print shows a reddish tint which blacks which are different from the cuprotype before. 
> 
> If I find a way either to get a nice spreading of the "emulsion" or to avoid the precipitation of copper(II)ferricyanide (alternativ make it colloidal, so that this stuff is not disturbing anymore) it would be a nice cyanotype-mix for reddish prints.
> 
> 
> bj68
> _______________________________________________
> Alt-photo-process-list | altphotolist.org



More information about the Alt-photo-process-list mailing list