[Alt-photo] Reply: Losing DMax in Kallitype prints

Jorj Bauer jorj at jorj.org
Thu Sep 3 21:43:41 UTC 2020

I seldom mix more than 250mL at a time...

1.25mL 10% gold chloride
12.5mL 10% thiourea
12.5mL 10% tartaric acid
distilled water to make 250mL

— j
On Sep 3, 2020, 5:34 PM -0400, George L Smyth <glsmyth at yahoo.com>, wrote:
> If it's the toner then that would be good/bad news - I would find the problem but then I'm out about 650ml of toner. (g)  I guess the only way to know for sure would be to buy more platinum and find out.  I do have some 1% gold so I could mix some of that up to see how well/poorly that might work.  Which gold toner formula do you use?
> I use distilled water to mix all of my chemistry, and the wash before and after clearing is done by swishing a bit of distilled water in the pan, so I am thinking that the pH should be okay.
> george
> --------------------------------------
> Handmade Photographic Images: http://www.GLSmyth.com
> Blog: http://GLSmyth.wordpress.com
> On Thursday, September 3, 2020, 05:27:36 PM EDT, Jorj Bauer <jorj at jorj.org> wrote:
> I’d suspect the toner. I usually gold tone my Kallitypes and that toner definitely does not last.
> But assuming it’s not the toner - has the pH of any of your solutions changed? IIRC density is affected by pH of the sensitizer pretty easily.
> — j
> >

More information about the Alt-photo-process-list mailing list