Christina Z. Anderson
christinazanderson at gmail.com
Sun Sep 20 20:16:37 UTC 2020
Good tips! I sent on to the person asking the question. It’s interesting that some printers have the issue, some have it when older, and some not. Pictorico is milky and easier to see I suppose.
> On Sep 20, 2020, at 2:14 PM, Laura Valentino via Alt-photo-process-list <alt-photo-process-list at lists.altphotolist.org> wrote:
> I use fixxons with the p600. Do you mean that the fixxons doesn't load into the printer? That happens to me sometimes, and then I put a sheet of regular paper behind it, or even a thin tissue paper. It then loads the film and leaves the paper.
> On 20/09/2020 19:52, Marek Matusz via Alt-photo-process-list wrote:
>> My old 3800 had this issue at the end of life. A wet fingerprint on the emulsion side on the lower left as you are facing the printer is a good solution. It makes it opaque enough. Appropriate wetness if from licking the finger. Maybe a wet sponge to wet the finger would be more civilized
>> Sent from my iPhone
>>> On Sep 20, 2020, at 2:22 PM, Joseph Smigiel via Alt-photo-process-list <alt-photo-process-list at lists.altphotolist.org> wrote:
>>> I've used Fixxons in an Epson P600, a 3880, and IIRC, a 4900 at a workshop
>>> without problems.
>>>> On Sun, Sep 20, 2020 at 2:45 PM Christina Z. Anderson via
>>>> Alt-photo-process-list <alt-photo-process-list at lists.altphotolist.org>
>>>> Dear List,
>>>> Has anyone experienced Fixxons not being recognized by the paper sensor in
>>>> an Epson P600? Or any Epson printer for that matter? I have not seen this
>>>> issue on the two P800s at work and my 3880 at home.
>>>> Alt-photo-process-list | altphotolist.org
>>> Alt-photo-process-list | altphotolist.org
>> Alt-photo-process-list | altphotolist.org
> Alt-photo-process-list | altphotolist.org
More information about the Alt-photo-process-list